EPICS linux-x86 Modbus/TCP Support for WAGO 750 PLC Software Downloads
- This page provides EPICS linux-x86 WAGO support software developed at the NSLS. The code is a port of "Rolf Keitel's TRIUMF EPICS device and driver support for Modicon PLCs on VxWorks" to "WAGO 750 PLC on Linux".
- The WAGO hardware and linux-x86 environment tested.
- Rolf's original source code can be found at: http://isacwserv.triumf.ca/epics/modtcp/
- The EPICS base is downloaded from: http://www.aps.anl.gov/epics/base/R3-14/6.php
Brookhaven National Laboratory Notice
********************************************
Acknowledgement of sponsorship
- - - - - - - - - - - - - - - - - - - - - - - - - - -
Part of this software was produced by the National Synchrotron Light
Source, Brookhaven National Laboratory, under Contract DE-AC02-98CH10886 with
the Department of Energy.
Government disclaimer of liability
- - - - - - - - - - - - - - - - - - - - - - - - - -
Neither the United States nor the United States Department of Energy, nor any of their employees, makes any
warranty, express or implied, or assumes any legal liability or responsibility
for the accuracy, completeness, or usefulness of any data, apparatus, product,
or process disclosed, or represents that its use would not infringe privately
owned rights.
Brookhaven disclaimer of liability
- - - - - - - - - - - - - - - - - - - - - - - - - -
Brookhaven Nataionl Laboratory makes no representations or warranties, express or implied, nor assumes any
liability for the use of this software
Contact: Ivan So: so@bnl.gov