| REVISION TABLE |
| Rev |
Description |
Date |
| 0 |
Initial Document |
07-28-1999 |
| A |
Added section “Assurance of Required Training”, updated section “Goals and Objectives”. |
05-08-2000 |
| B |
Converted to Controlled Document format in HTML; removed all information already documented in BNL SBMS. |
11-28-2001 |
| C |
Removed all references to ATF (deleted section 3.7.8 and other sentences as applicable); renumbered section 3.7.9 to 3.7.8;
clarified ESH briefing policy (3.5.4); ATS item 1236.3.1 - specify thatusers receive environmental training through NSLS SafetyModule and staff get the BNL
employee requirement (text included in Section 3.10). |
08-26-2002 |
| D |
Added policy for Resident Beamline Staff;changed references of SDL to DUV-FEL. |
01-21-2004 |
| E |
Added Section 3.15, "Occupational Health and Safety Assessment Series (OHSAS) 18001." |
09-13-2005 |
| F |
Revision to Section 6.1: Modified from
"Crane and Forklift training documentation (including card)"
to "Crane and Forklift training documentation." The word
"card" referred to the Safety Awareness Certificate (SAC)
issued to an authorized user of cranes or forklifts after successful
completion of a hands-on practical course. The card is no longer
issued at the NSLS. Successful completion of the practical is now
indicated on a form, which is completed by the Assistant Building
manager. The course code for the practical is subsequently entered
into the BTMS to indicate qualification. |
12-01-2005 |
| G |
No text changes made. Revision is to
conform to improved numbering system. Document Number changed from
LS-TRN-0001 to LS-TRN-POL-0001 |
04-13-2006 |
| H |
Changed course code for NSLS Safety Module
from LS-ESH-ORIENTATION to LS-ESH-SAFETY |
07-06-2006 |
| I |
(1) Updated course codes. (2) Corrected
course requirements for beamline staff and contractors. (3) Added 3.6
(e). (4) Modified 3.9 to apply to SDL technical staff, operational
staff, and facility users (prior language appears to require any tech
requiring access to be trained; access may be required for non-SDL
purposes). (5) 3.11 modified to add training assigned per work planning
procedures. (6) 3.15.2, 3.15.3, 3.15.4 removed since all job titles are
inclusive in the “NSLS Staff” in 3.15.1. (7) 6.1 modified to eliminate
specific courses listed since list is not all inclusive; linked to NSLS
training website for list and links. |
03-14-2007 |
| J |
Modified 3.5.2 to add new course code for
NSLS Briefing for Safeguards and Security personnel. Modified 3.15 to
change 18000 to 18001. Modified Section 6.6 to include "or
by a designated member of the NSLS User Administration Office." Full
review of policy; no other changes. |
07-31-2007 |
