NSLS Training Courses

Most of the "LS-" courses are "read and sign" documents (read the required text, print and sign the form, and send the original to the Training Coordinator). If the link takes you to the BNL Web Training Center webpage of the Brookhaven Training Management System (BTMS), scroll down the page until you locate the required course.

Courses Most Often Required for NSLS Employees and Guests
Course Code Course Name Rev Log
LS-BLOSA-SDL Beamline Operations Safety Awareness for Source Development Lab  
LS-CR-ALWINCH NSLS Amp Line Winch Training  
LS-EL-PPE-CAT1 Electrical PPE Category 1  
LS-EL-PPE-CAT2 Electrical PPE Category 2  
LS-EL-PPE-CAT4 Electrical PPE Category 4 (Switch Ops)  
LS-ENV-CRYSTAL-ETCH Job Specific Environmental Awareness Training – Crystal Etching Log
LS-ENV-CRYSTAL-CUT Job Specific Environmental Awareness Training – Crystal Cutting Log
LS-ENV-ELECMECH NSLS Environmental Awareness for Mechanical and Electrical Technicians Log
LS-ENV-LEAD Job Specific Environmental Awareness Training – Lead Working Log
LS-ENV-PHOTO Job Specific Environmental Awareness Training – Photographic Darkroom Operations Log
LS-ENV-SAA Job Specific Environmental Awareness Training – NSLS SAA Managers Log
LS-ENV-SHOP Job Specific Environmental Awareness Training – Machine Shop Users Log
LS-ENV-VAC Job Specific Environmental Awareness Training – Vacuum System Maintenance Log
LS-ENV-WAT Job Specific Environmental Awareness Training – Regeneration of Mixed Bed Deionizer for NSLS Process Water Systems and Cooling Water System Maintenance Log
LS-ESH-CONTRACTOR NSLS Facility-Specific Environment, Safety, and Health (ESH) Briefing for Contractors. See one of the following staff for briefings: ESH Coordinator, Safety Officer, Building Manager, Training Coordinator, and also NSLS Control Room staff (only during non-business hours and with prior arrangement). Log
LS-ESH-FOODMACH NSLS Facility-Specific Environment, Safety, and Health (ESH) Briefing for Food Machine Vendors. See one of the following ESH Staff for briefings: ESH Coordinator, Safety Officer, Deputy Safety Officer, Building Manager. Log
LS-ESH-LSSTAFF NSLS Facility-Specific Environment, Safety, and Health (ESH) Briefing for all personnel (employees and guests) joining the NSLS staff and will serve as the facility-specific training for non-scientific/non-technical NSLS or BNL staff. See the ESH Coordinator for briefings. Log
LS-ESH-PESM NSLS Facility-Specific Environment, Safety, and Health (ESH) Briefing For personnel from BNL Plant Engineering, Procurement & Property Management, and other employees (non-NSLS) performing hands-on work in NSLS Controlled Areas. Briefing is not intended for personnel from Emergency Services, Safeguards & Security, or for Beamline Staff. For initial briefing, see either: ESH Coordinator, RCD Facility Rep, Bldg. Mgr., or ESH Engineer. Additional information for custodial staff. For refresher training, follow instructions on the form. Log
LS-ESH-SAFEEMERG NSLS Facility-Specific Environment, Safety, and Health (ESH) Briefing For Emergency Services Personnel. See one of the following for briefings: ESH Safety Officer, ESH Coordinator.  
LS-ESH-SDL SDL ESH Briefing. See one of the following Staff for your initial briefing: P. Singh, X. Wang, N. Gmur. For the refresher, follow the instructions on the form.  
LS-ESH-SSD (Read) NSLS Facility-Specific Environment, Safety, and Health (ESH) Briefing For Safeguards & Security Personnel (Reading Material).  

LS-ESH-SSD (Sign)

NSLS Facility-Specific Environment, Safety, and Health (ESH) Briefing For Safeguards & Security Personnel (Signature Form). Log
LS-ESH-SAFETY NSLS Safety Module  
LS-LEADPRM NSLS Lead Working Guidelines  
LS-NANO-SAFETY NSLS Nano-Science Safety Requirements Training  
LS-OPS-EMERGRESP Emergency Response - NSLS Operations Group
See Bob Chmiel (x8141, chmiel@bnl.gov) for course
 
LS-OPS-ODHRESP NSLS Operations Response to Oxygen Deficiency Hazard - Procedure and Meter Operations Checklist  
LS-OPS-SPILL Ops. Response to Chemical Spills  
LS-PROC-NANOHOOD-128 NSLS Nano-Material Hood Operations  
LS-RAD-AM241 Americium-241 Sealed Source User Awareness Log
LS-RAD-XRAYTUN NSLS X-Ray Tunnel Hazard Awareness  
LS-SH-BLTSND Belt/Disc Sander Safety  
LS-SH-BNDSW Band Saw Safety  
LS-SH-DRILLPR Drill Press Safety  
LS-SH-GRINDER Pedestal Grinder Safety  
LS-SH-LATHE Lathe Safety  
LS-SH-MILLING Milling Machine Safety  
LS-SH-RULES1 NSLS Shop User Safety Rules Acknowledgement. See Dennis Carlson (x4926, dgcarlson@bnl.gov) if this is your initial training. For the refresher, follow instructions on the form.  
LS-SH-VID2 NSLS Shop User Video. See Dennis Carlson (x4926, dgcarlson@bnl.gov).  
LS-VUV-ACCESS VUV Ring Access Safety Orientation Form
Also read NSLS procedure LS-ESH-0013, "Controlled Access to the VUV Ring"
 
LS-WCC-BRIEF NSLS Work Control Coordinator Briefing